工厂年度自我评价报告范文 第一篇

In the long-term work practice adhere to the xxxsafety first, prevention firstxxx, strictly enforce the safety rules and regulations, based on their own positions, take the initiative to play a subjective initiative at the same time, adhere to the standard criteria for strict requirements themselves,Amount to complete the production work tasks.

Style solid, hard work hard working. Can strictly according to the standardization request, the procedure, the system and the measure, carries out each work, when meets the difficulty, perseverance, takes the initiative to overcome the difficult question which faces to face each duty which the leadership delivers. In the early stage of the workshop merger, the working facilities of the newly established Lechang power supply workshop were not complete. The workshop network could not be used. In order to transmit the production information in time, the communication equipment was put into operation to ensure the smooth flow of production information. In 20__, I carried out the first contact catenary repair, as a electric power for the contact network focused on the preparation of the work plan, from learning to application, from ignorant to gradually understand, all embodies the tenacious struggle of professionalism.

工厂年度自我评价报告范文 第二篇

In the twinkling of an eye, one year's work is spent in a tense and busy, the new year new starting point new opportunities and new challenges, I will work harder to learn, will improve my ability to work, do not live up to you Expectations, I will strive to do their jobs.

Since taking part in the work, I earnestly complete the work, study hard, think positively, individual ability rises gradually. I am thinking, learning, work has made new progress, but I also recognize that they have too many shortcomings, theoretical knowledge and low level of operation, skills are not strong. As a qualified operator, we must learn the rules of production equipment operating procedures, process safety knowledge and process parameters. Outside the loading operation process to pay attention to many things, no small mistake, there will be a big life-threatening risk of loss of economic dime, so everyone should take their own work to do to ensure safety in production . (Internal control of the job is very important, single-system, data, audit, monitoring, communication, communication, do not take five and so check six pairs, check the driver tank volume table, pressure filling certificate, dangerous transport card ). In addition, the train is running fast also rely on the front, because just to work soon, in terms of experience, or from thinking there are many deficiencies in these areas I got the company leadership, department heads and squad workers of the correct guidance, The dragon is to carry out job training skills training, so that we have a better opportunity to enhance their theoretical knowledge of security and operational skills, in the learning process, I have a lot of uncertainty, we always patiently explain to me, I would like to express my heartfelt gratitude to all of you.

In short, into the company has more than a year (in the car loading unit under the leadership of master Ke) along the way, enjoy the pain, but also the luxury of happiness, there is no credit for labor, but either laughter or tears, Working for life, working for our dreams, we are brave to face a lot of difficulties, I think these will be the growth of each of us to the glorious stage of bit by bit.

upcoming, future work may be more difficult, more and more competition will give us a great deal of pressure, as long as the heart relaxed, the pressure into motivation, this is what we have been continuous progress Of the common ground, with the share of the ideals of hard work we will do better!

工厂年度自我评价报告范文 第三篇

Time flies, years have been quietly away from us, looking back over the past year, the heart can not help but be filled with emotion. Over the past year, the company leadership and colleagues in the support and help, I am strict demands on themselves, in accordance with the requirements of the company and the workshop, to better complete their own work, and through efforts to make their own work in the new modelOf the breakthrough, the work has been greatly improved. The work in 20xx is summarized as follows:

First, the main work done

1. Workshop construction and management have been strengthened

Because I did not work for a long time, because of the chaotic management of the workshop, so in the workshop there are many problems to be solved. In order to solve these problems, I propose to take measures to regulate the implementation of positive incentive system in 20xx. For the better performance of the team to give employees plus assessment points, and for the poor performance of the staff are determined to deduct a certain assessment points. Take this rewards and punishments, fair and impartial assessment methods, I believe that the implementation of team staff will be greatly improved and will improve the team cohesion.

2. Pay close attention to safety management

After finishing the relative to the company's other workshops for more security risks, more prone to accidents, in the past 20xx, there have been several work-related accidents, these accidents have been to the company and the workshop losses. xxxFool with blood for the lesson, the wise use of lessons to avoid accidentsxxx, although the power is not great, but shoulders the whole class of more than a dozen employees of the important task of life safety. Therefore, for security work I have never relaxed, Yueyue Jiang, every day.

3. To ensure product quality

With the expansion of the company's size and visibility of the increasing customer Xinhui the quality requirements are also getting higher and higher, so the company's high-level attention to product quality has also been referred to an unprecedented level. Xinhui as a whole the last pass, after finishing the responsibility to shoulder more and more. I know that as a workshop monitor, their work directly affect the quality of the work of the workshop. For the company's responsibility, I have been in quality control has been lax, and colleagues in a timely manner and timely communication and exchange of information, for the production process problems, defects never easily let go. At the same time to strengthen the importance of the quality of staff awareness, require everyone to do a good job self-inspection and mutual inspection work to ensure that a problem from the class into the market.

4. Actively participate in shop improvement activities

After finishing the workshop is like a big family, I live and work in this warm family every day, as a member of this family I think I have the obligation and responsibility to build her better harmony. Therefore, over the past year, I plot and workshop improvement activities, and mobilize the enthusiasm of team members, the use of collective wisdom of the workshop made a lot of valuable improvements.

5. Strengthen their own learning, improve the business level

Because of the heavy burden of their own body, and their knowledge, ability and experience with a good competent monitor have a certain distance, so the total can not be taken lightly, has been learning, learning to the books, learning to the surrounding leaders, To learn from colleagues, and actively improve the quality of their business, and strive to improve work efficiency and quality of work, for work this year's efforts to feel that they still have some progress, be able to calmly deal with the daily work of the various problems, in the organization and management capacity, comprehensive analysis, coordination and writing skills and verbal ability, etc. A great improvement to ensure that the work of the normal operation of the post, to the right attitude towards the various tasks, with a strong professionalism, sense of responsibility.

工厂年度自我评价报告范文 第四篇

今年工作以来，在单位领导的精心培育和教导下，通过自身的不断努力，不管是思惟上、学习上仍是工作上，都取得了长足的发展和巨大的收成。我对自己今年的自我评价是比较满足的。思惟上，积极参加政治学习，坚持四项基本原则，拥护党的各项方针政策，自觉遵守各项法规。

工作上，本人自xxxx年工作以来，先后在某某部分、某某科室、会计科等科室工作过，无论走到哪里，都严格要求自己，耐劳钻研业务，争当行家里手。就是凭着这样一种坚定的信念，我已纯熟把握储蓄、会计、计划、信用卡、个贷等业务，成为xx行业务的行家里手。

记得，刚进xx行，为了尽快把握xx行业务，我天天都提前一个多小时到岗，训练点钞、打算盘、储蓄业务，固然那时住处离工作单位要坐车1个多小时，但我天天都风雨无阻，特别是冬天，雪窖冰天，怕挤不上车，我经常要提前两、三个小时上班，就是那时起我养成了早到单位的习惯，现在天天都是第一个到行里，先打扫卫生，再看看业务书或预备预备一天的工作，也是这个习惯，给了我充足的时间学习到更多的业务知识，为我几年来工作的顺利开展打下了良好的基础。

我工作过的岗位大部门在前台，为了能更好的服务客户，针对不同层次、不同需求的客户，我给予不同的匡助和服务，记得有一位第一次到我行客户，当我了解到他要贷款买二手房时，因为他不知该怎么办，只是有个想法主意，我便具体地向他先容了个贷的所有手续。除了在服务客户上我尽心尽力，在行里组织的各项流动中我也积极响应，常常参加单位组织的各项竞赛，展示自我，并取得了优异的成绩，受到了单位的嘉奖。

学习上，自从参加工作以来，我从没有抛却学习理论知识和业务知识。因为我毕业财校属于中专，刚工作我就利用业余时间自学大专，并于xx年毕业，但我没有知足于现状，又于xx年自修东北大学金融本科，因为学习勤奋耐劳，成绩优良，学习中受到老师充分肯定，目前正在积极预备论文答辩。不但把握和进步了金融知识，也有了一定的理论水平，完全达到了本科生所具有的水准。学习理论的同时，更加钻研业务，把学到的金融知识融会到工作中去，使业务水平不断进步，并于xx年参加全国中级经济师资格考试，顺利通过同时被行里聘为中级师。在多年的业务知识考核当中，每次会计业务资格考试都达到1级水平。

最后，我想说的是，上面只是我工作中取得的一点成绩，这与单位的领导和同事们的匡助是分不开的。我始终坚信一句话“一根火柴再亮，也只有豆大的光。但倘若用一根火柴去点燃一堆火柴，则会熊熊燃烧”.我但愿用我亮丽的青春，去点燃附近每个人的激情，感召激励着同事们一起为我们的事业奉献、进取、立功、建业……

工厂年度自我评价报告范文 第五篇

I work, has been engaged in a line of electrical work, over the years, I have strict demands on themselves, work conscientiously. Mainly from the following aspects to sum up:

First, the ideological and political learning and democratic management

I earnestly studied Marxism-Leninism, Mao Zedong Thought and Deng Xiaoping Theory, and guided the production practice in the spirit of the three represents.

Actively participate in all kinds of democratic activities, participate in democratic management, work hard at home, work well, and do a good job as a production frontline electrician.

Second, the safety aspects

1, implement the spirit of the higher documents to improve the safety awareness of workers, enhance the sense of responsibility of workers.

2, to implement and improve the safe use of electricity organizational system, improve safety management rules and regulations.

3, to strengthen safety management team to consolidate the security base.

4, one to ensure that electricity consumers to ensure their own safety and security of others.

工厂年度自我评价报告范文 第六篇

本人待人诚恳，能做到堂堂正正做人，踏踏实实工作，担任年级组长，能真心诚意协助好校领导做好年级组工作，协调好教师与教师、教师与校领导之间的关系。使年级组每个教师都有一个舒适的工作和学习环境，提高他们工作的积极*，激发他们工作的原动力，在工作中我更是尽心尽职，克服困难，虽然工作单位离家较远，生活不方便，但我能克服困难，不管春夏秋冬，不管风雨晴天，每天都能坚持早到校，教学上更是积极钻研教材、教法，认真备好上好一堂课，对学生能做到循循善诱，担任班主任，，勤勤恳恳，任劳任怨。在加入党组织之前的群众意见征求时，同事们给了我很高的评价，我把它当作是鞭策我今后生活、工作的一笔可贵的精神财富。

时间匆匆转走，现在的工作已经渐渐变得顺其自然了，这或许应该是一种庆幸，是让我值得留恋的一段经历。一个多月的试用期下来，自己努力了，也进步了不少，学到了很多以前没有的东西，我想这不仅是工作，更重要的是给了我一个学习和锻炼的机会。

在各部门的帮助和支持下，我做好统筹及上传下达工作，把工作想在前，做在前，无论是工作能力，还是思想素质都有了进一步的提高，较好地完成了公司宣传、人事管理、职工培训、档案管理、后勤服务及公司保卫等多方面的任务。为了加强对人、财、物的管理，我完善了过去的各种管理制度，突出制度管理，严格照章办事，进一步明确了工作职责，完善了公章使用、纸张使用、电脑使用、请假、值班等各种常规管理，充分体现了对事不对人的管理思想，各项工作井然有序。

工作上我认真、细心且具有较强的责任心和进取心，勤勉不懈，具有工作热情;*格开朗，乐于与他人沟通，有很强的团队协作能力;责任感强，确实完成领导交付的工作，和公司同事之间能够通力合作，关系相处融洽而和睦，配合各部门负责人成功地完成各项工作。

在***上班的日子里，我渐渐喜欢上了这个地方，喜欢上了这份工作，想在这里慢慢成长成材，成为一名合格的正式***里的职工，一个月的学习与工作，让我成长了很多，今后我会继续努力，一如既往地保持着优良的作风，不断地完善自己，作出一番成绩。

本人于201*年x月x号进厂，从来公司的第一天开始，我就把自己融入到我们的这个团体中，不知不觉已经三个多月了，现将这三个月的工作情况总结如下：

一、非常注意的向周围的老同事学习，在工作中处处留意，多看，多思考，多学习，以较快的速度熟悉着公司的情况，较好的融入到了我们的这个团体中。

二、在工作中，善于思考，发现有的单据在处理上存在问题，便首先同同事进行沟通，与同事分享自己的解决思路，能解决的就解决掉，不能解决的就提交上级，同时提出自己的意见提供参考。

三.热心回答同事询问的问题。我认为大家的能力都提高了，我们的公司才会整体提高。

总之，经过三个月的试用期，我认为我能够积极、主动、熟练的完成自己的工作，在工作中能够发现问题，并积极全面的配合公司的要求来展开工作，与同事能够很好的配合和协调。在以后的工作中我会一如继往，对人：与人为善，对工作：力求完美，不断的提升自己的水平及综合素质，以期为公司的发展尽自己的一份力量。